Really have a thing for Aluminum

If it ain't about boats, it should go here.

Moderator: Soñadora

Re: Really have a thing for Aluminum

Postby Tucky » Mon Jul 06, 2015 9:41 am

Cherie320 wrote:
Tucky wrote:I love polishing my car- your trailer might be a little much, though. Beautiful rig.

Caterham.jpg


Jessie, always wanted a Seven. I really like shiny aluminum! Pat


I know you can't tow a trailer with a Seven, but I can tow the Seven behind an RV and that is my plan- silliest grocery car ever. Won't hold groceries. Back in the day I crossed the country in a Ford van with a CB750 Honda in the back. I figure this is the old man's equivalent.
Jesse Deupree
F-31 SORN
Portland Maine
User avatar
Tucky
 
Posts: 1416
Joined: Sun Jan 13, 2013 4:46 pm

Re: Really have a thing for Aluminum

Postby Cherie320 » Mon Jul 06, 2015 10:46 am

Tucky wrote:
Cherie320 wrote:
Tucky wrote:I love polishing my car- your trailer might be a little much, though. Beautiful rig.

Caterham.jpg


Jessie, always wanted a Seven. I really like shiny aluminum! Pat


I know you can't tow a trailer with a Seven, but I can tow the Seven behind an RV and that is my plan- silliest grocery car ever. Won't hold groceries. Back in the day I crossed the country in a Ford van with a CB750 Honda in the back. I figure this is the old man's equivalent.


You are going to be the envy of all the old sports car gear heads in the RV park. Cool!
User avatar
Cherie320
 
Posts: 682
Joined: Thu Jan 03, 2013 10:44 am

Re: Really have a thing for Aluminum

Postby Lin » Tue Jul 07, 2015 12:44 am

Cherie, my Mom & step-dad did travel extensively in their trailer. However, almost every September they would head down to the Oregon coast. They would set up at the same place each year, close to and overlooking the ocean and beautiful coast. (sadly the spot is all built up with condos, now). They would stay there for a period of a month to 6 weeks, and enjoy the sea, golf and walking the beaches, sometimes with friends who would rendezvous there. It was wonderful to head down there and spend a few days with them.

If you ever come out west, let us know. I hope you discover many places that become special to you.
User avatar
Lin
 
Posts: 874
Joined: Wed Dec 12, 2012 11:13 pm
Location: Canada

Re: Really have a thing for Aluminum

Postby Cherie320 » Tue Jul 07, 2015 10:39 pm

Lin the West is special. This is a viewpoint where HW1 pops out on the coast above Fort Bragg. It was Glimmer's first introduction to salt water and was the start of a trip down the coast to Jenner. About a week later, we towed her up the coast from Cambria to Monterey. Very beautiful views and worth a repeat performance. Certainly understand your parents annual return to the serenity and peace of the Oregon coast. Pat
You do not have the required permissions to view the files attached to this post.
User avatar
Cherie320
 
Posts: 682
Joined: Thu Jan 03, 2013 10:44 am

Re: Really have a thing for Aluminum

Postby Cherie320 » Tue May 10, 2016 10:31 pm

So, last Fall we visited the East. Trip went North through Yellowstone and into Montana for a wedding. Then we traveled through North Dakota and visited Nancy's Notions in Beaver Dam Wisconsin. Wife is a quilter and you have to balance out the hobby/lifestyles to keep the family happy. We dropped down to Jackson Center Ohio to see the factory where Airstream coaches are built. A bit of a trip back in time even though the Toyota Mfg method is touted not too far from a set of Honda mfg plants. We visited Niagra Falls and really enjoyed Goat Island. Not the tourist filled area that the other side of the border looks to be. We saw Vermont, a lot of covered bridges, New Hampshire and then a bit of Maine. The coast was interesting considering a rather large hurricane was off shore, but it kept moving East much to our appreciation. We looked for the turning colors and saw only a sample as 2015 was not a prime year. Ended up having lobster in New Hampshire and blue berry pie in Maine. The Lancaster county was a glimpse into a different way of life and we saw our only bear in West Virginia on a late night passage. We came home in record time due to a plumbing issue.

This trip was one of the main reasons we purchased Glimmer. Lots less expensive than a condo and flexible on a year to year basis. We still have more of the East to see and enjoy. But there is a set of videos in our library that shows the geological history of how National parks were formed and a few of those need our attention. And then again, anyone tried Western Canada?

Travel Safe. Fail winds to all. Pat
User avatar
Cherie320
 
Posts: 682
Joined: Thu Jan 03, 2013 10:44 am

Re: Really have a thing for Aluminum

Postby Jamie » Wed May 11, 2016 3:05 am

Cherie320 wrote:So, last Fall we visited the East. Trip went North through Yellowstone and into Montana for a wedding. Then we traveled through North Dakota and visited Nancy's Notions in Beaver Dam Wisconsin. Wife is a quilter and you have to balance out the hobby/lifestyles to keep the family happy. We dropped down to Jackson Center Ohio to see the factory where Airstream coaches are built. A bit of a trip back in time even though the Toyota Mfg method is touted not too far from a set of Honda mfg plants. We visited Niagra Falls and really enjoyed Goat Island. Not the tourist filled area that the other side of the border looks to be. We saw Vermont, a lot of covered bridges, New Hampshire and then a bit of Maine. The coast was interesting considering a rather large hurricane was off shore, but it kept moving East much to our appreciation. We looked for the turning colors and saw only a sample as 2015 was not a prime year. Ended up having lobster in New Hampshire and blue berry pie in Maine. The Lancaster county was a glimpse into a different way of life and we saw our only bear in West Virginia on a late night passage. We came home in record time due to a plumbing issue.

This trip was one of the main reasons we purchased Glimmer. Lots less expensive than a condo and flexible on a year to year basis. We still have more of the East to see and enjoy. But there is a set of videos in our library that shows the geological history of how National parks were formed and a few of those need our attention. And then again, anyone tried Western Canada?

Travel Safe. Fail winds to all. Pat


Is there a place for your milimeter?
Jamie
 
Posts: 4140
Joined: Thu Feb 07, 2013 10:34 am

Re: Really have a thing for Aluminum

Postby Tucky » Wed May 11, 2016 8:00 am

Sounds like a great trip- if you get close to Maine again, let me know.
Jesse Deupree
F-31 SORN
Portland Maine
User avatar
Tucky
 
Posts: 1416
Joined: Sun Jan 13, 2013 4:46 pm

Re: Really have a thing for Aluminum

Postby Cherie320 » Wed May 11, 2016 2:37 pm

Jamie - no room for trailer number two. And Bitsey is not happy about it. Would be a bit of a problem packing her on the stern of Cherie as well. There are folks who pack ATVs on the bed of their One Ton Trucks. Bitsey could make that trip, but It's not a tow Vehicle I want to drive. There are also a few folks who mount their trailer on the back of a long Semi-tractor. Kind of works. Might be a trip for Bob. But likely Bitsey and Glimmer will not cross paths on a regular basis. Different horses for different courses.

We did have some boating interest on our trip. Mystic Seaport has been on the bucket list for about 40 years now. It was not quite what I expected, but they welcomed our dogs and we had a great time. It really is three worlds - a reproduction of a seaside village, a museum of sailing trades, and a wooden ship building restoration facility. There is a new exhibit on Whaling too. All interesting. Kind of felt you could roll up your sleeves and get to work. The guides needed some training, the restorations needed more help, the docks needed more boats, and everyone was enjoying the experience.

Tucky - Our other dip into the world of boating was visiting the Maine coast. We try to stay away from crowds, so we hit the coast just above Bar Harbor. Felt good to see folks living in quiet communities with boats that looked like they were used. There was a lobster operation a bit farther up the coast that was interesting as well. We had planned to make it all the way up the coast, but felt we should move on before the weather turned against us. Guess we left a little for a future trip.

Pat
User avatar
Cherie320
 
Posts: 682
Joined: Thu Jan 03, 2013 10:44 am

Re: Really have a thing for Aluminum

Postby Cherie320 » Wed May 11, 2016 3:01 pm

Covered bridges are fun to visit. They seem to get upgraded to carry more load and are a mix of traditional and tourist attraction. Most did not accommodate Glimmer, but we did cross that last one three times before we could work our way out of town. Pat
You do not have the required permissions to view the files attached to this post.
User avatar
Cherie320
 
Posts: 682
Joined: Thu Jan 03, 2013 10:44 am

Re: Really have a thing for Aluminum

Postby Cherie320 » Wed May 11, 2016 9:30 pm

Can't imagine what I was thinking of when I took this picture. Oh, yes, the blocks need a coat of varnish.

The boats - you have to see the boats.

Pat
You do not have the required permissions to view the files attached to this post.
User avatar
Cherie320
 
Posts: 682
Joined: Thu Jan 03, 2013 10:44 am

Re: Really have a thing for Aluminum

Postby Tucky » Thu May 12, 2016 7:54 am

Cherie320 wrote:Tucky - Our other dip into the world of boating was visiting the Maine coast. We try to stay away from crowds, so we hit the coast just above Bar Harbor. Felt good to see folks living in quiet communities with boats that looked like they were used. There was a lobster operation a bit farther up the coast that was interesting as well. We had planned to make it all the way up the coast, but felt we should move on before the weather turned against us. Guess we left a little for a future trip.

Pat


You did that perfectly- the coast from Schoodic to Lubec is a wonderful trip back in time- its like the southern Maine I came to as a child. Wonderful people. Worth coming back, from Cutler round to Eastport is spectacular and Cobscook State park has RV and trailer sites right on the water that will take your breath away. Let me know if you come again- a friend of my brother has an Airstream, they are really nice.

My father was involved with Mystic Seaport for many years and I've spent a lot of time there. They need visitor income, so it can edge into amusement park territory, but they have saved a lot of neat boats.
Jesse Deupree
F-31 SORN
Portland Maine
User avatar
Tucky
 
Posts: 1416
Joined: Sun Jan 13, 2013 4:46 pm

Re: Really have a thing for Aluminum

Postby kdh » Thu May 12, 2016 6:46 pm

Tucky wrote:
Cherie320 wrote:Tucky - Our other dip into the world of boating was visiting the Maine coast. We try to stay away from crowds, so we hit the coast just above Bar Harbor. Felt good to see folks living in quiet communities with boats that looked like they were used. There was a lobster operation a bit farther up the coast that was interesting as well. We had planned to make it all the way up the coast, but felt we should move on before the weather turned against us. Guess we left a little for a future trip.

Pat


You did that perfectly- the coast from Schoodic to Lubec is a wonderful trip back in time- its like the southern Maine I came to as a child. Wonderful people. Worth coming back, from Cutler round to Eastport is spectacular and Cobscook State park has RV and trailer sites right on the water that will take your breath away. Let me know if you come again- a friend of my brother has an Airstream, they are really nice.

My father was involved with Mystic Seaport for many years and I've spent a lot of time there. They need visitor income, so it can edge into amusement park territory, but they have saved a lot of neat boats.

I know mostly potato country in Maine, but have spent some time downeast, especially when I was building my boat. Stayed in Lubec transiting to Prince Edward Island. My aunt from Bangor, who grew up in Fort Kent, thought Lubec a hopeless backwater.
User avatar
kdh
 
Posts: 4627
Joined: Tue Dec 11, 2012 12:36 pm
Location: Boston/Narragansett Bay

Re: Really have a thing for Aluminum

Postby Cherie320 » Thu May 12, 2016 6:54 pm

We enjoyed it all.....except the roads. They do not do well with all the frost heave. Lots of adjustments to the original design. Not well matched to directional stability and any velocity above a crawl.

We finally gave up on looking for color and were working our way back West on secondary roads when we stopped to walk the dogs and avail ourselves of the trailer facilities. We had been there about 5 minutes when a fellow in a pickup pulled in beside us to talk. He has just sold a Tradewinds model that was purchased new. He picked it up with his farm tractor from the dealer and towed it home. Said it got moved all around his property for probably about 30 years and never made a trip on the road. Interesting guy to talk to. He was on his way to help a friend haul out a boat. Everyone in Maine must have a boat. :)

Potato country? I thought all they grew up there was blue berry pie.

:) Pat
User avatar
Cherie320
 
Posts: 682
Joined: Thu Jan 03, 2013 10:44 am

Re: Really have a thing for Aluminum

Postby kdh » Thu May 12, 2016 6:57 pm

Please remember that there is a lot of frost heave in Maine.
User avatar
kdh
 
Posts: 4627
Joined: Tue Dec 11, 2012 12:36 pm
Location: Boston/Narragansett Bay

Re: Really have a thing for Aluminum

Postby Cherie320 » Thu May 12, 2016 8:27 pm

Any one need a deal on line. This is the progressive version of the rope we made when I was in Scouts. Spliced a lot of three strand. Need significant instruction on that double and single braid stuff. A lot to learn here. :) Pat
You do not have the required permissions to view the files attached to this post.
User avatar
Cherie320
 
Posts: 682
Joined: Thu Jan 03, 2013 10:44 am

Re: Really have a thing for Aluminum

Postby Cherie320 » Sat May 14, 2016 7:59 pm

If you find yourself in the Monterey CA area without a place to park your RV, give the Laguna Seca Recreational area a try. Seniors get a $37 a night rate for non-race day stays. Gives you a good base camp for the trip down HW1. The Can Am loop is along side the road that the transporters take to get to the pits. :) Pat
You do not have the required permissions to view the files attached to this post.
User avatar
Cherie320
 
Posts: 682
Joined: Thu Jan 03, 2013 10:44 am

Re: Really have a thing for Aluminum

Postby Cherie320 » Sat May 14, 2016 10:27 pm

Did I mention I liked Aluminum ..... Body, engine, transaxle ...... lots of the stuff. Shiny too.

Oh, that last one is just slipped in to show Leno likes aluminum too. :) Pat
You do not have the required permissions to view the files attached to this post.
User avatar
Cherie320
 
Posts: 682
Joined: Thu Jan 03, 2013 10:44 am

Re: Really have a thing for Aluminum

Postby BeauV » Sun May 15, 2016 1:16 am

:like: :like: :like: :like: :like:

My favorite track. My old MORGAN has spilled a lot of oil on that track!!
____________________
Beau - can be found at Four One Five - Two Six Nine - Four Five Eight Nine
User avatar
BeauV
 
Posts: 14660
Joined: Tue Dec 11, 2012 2:40 am
Location: Santa Cruz or out sailing

Re: Really have a thing for Aluminum

Postby kimbottles » Sun May 15, 2016 1:57 am

Cherie320 wrote:Did I mention I liked Aluminum ..... Body, engine, transaxle ...... lots of the stuff. Shiny too.

Oh, that last one is just slipped in to show Leno likes aluminum too. :) Pat


300SLR!!!
User avatar
kimbottles
 
Posts: 7038
Joined: Tue Dec 11, 2012 10:30 am
Location: Bainbridge Island, WA

Re: Really have a thing for Aluminum

Postby Cherie320 » Sun May 15, 2016 11:32 am

BeauV wrote::like: :like: :like: :like: :like:

My favorite track. My old MORGAN has spilled a lot of oil on that track!!


Major bucket list item. Would rather not spill oil on the track, but really would like to go round and round and round........and round. Just not this way. :angel: Pat
You do not have the required permissions to view the files attached to this post.
User avatar
Cherie320
 
Posts: 682
Joined: Thu Jan 03, 2013 10:44 am

Re: Really have a thing for Aluminum

Postby Tucky » Tue May 17, 2016 3:22 pm

Hope that ended with just dirt marks. I'm amazed at the cars wealthy people will race around a track. Here are a couple from my track days last spring at Lime Rock- The Aston fiits with the aluminum theme.

Lime Rock Aston .jpg


LimeRock Ferrari.jpg
You do not have the required permissions to view the files attached to this post.
Jesse Deupree
F-31 SORN
Portland Maine
User avatar
Tucky
 
Posts: 1416
Joined: Sun Jan 13, 2013 4:46 pm

Re: Really have a thing for Aluminum

Postby BeauV » Tue May 17, 2016 6:22 pm

I've always admired and adored the cars that owners left "as raced". Meaning that they didn't fix the dent that Jim Clark put in the back of the Ferarri F1 car when he slipped in the pits. To me "as raced" is the ultimate - so much better than "freshly restored".

Hell, I have scars and wrinkles, why shouldn't my car!??!
____________________
Beau - can be found at Four One Five - Two Six Nine - Four Five Eight Nine
User avatar
BeauV
 
Posts: 14660
Joined: Tue Dec 11, 2012 2:40 am
Location: Santa Cruz or out sailing

Re: Really have a thing for Aluminum

Postby Cherie320 » Tue May 17, 2016 10:01 pm

Yes, no scars and returned to the fun. But soon to be replaced by aluminum. And then a mystery slides inn ---- what is it and is it aluminum or glass?
You do not have the required permissions to view the files attached to this post.
User avatar
Cherie320
 
Posts: 682
Joined: Thu Jan 03, 2013 10:44 am

Re: Really have a thing for Aluminum

Postby SloopJonB » Tue May 17, 2016 11:09 pm

Bocar?
Location: West Vancouver B.C.
User avatar
SloopJonB
 
Posts: 1506
Joined: Fri May 24, 2013 9:21 pm
Location: West Vancouver, B.C.

Re: Really have a thing for Aluminum

Postby kimbottles » Wed May 18, 2016 12:45 am

Tucky wrote:
LimeRock Ferrari.jpg


Ooh aah.........that's the model of the first Ferrari I ever got to drive (thanks to my dear departed friend Ham Kelly who owned it.)

That one might even be the very car, who knows!!
User avatar
kimbottles
 
Posts: 7038
Joined: Tue Dec 11, 2012 10:30 am
Location: Bainbridge Island, WA

Re: Really have a thing for Aluminum

Postby Cherie320 » Wed May 18, 2016 6:41 pm

SloopJonB wrote:Bocar?



We got one of those. Under those numbers is a big blower mounted to the crank.

How about another hint?
You do not have the required permissions to view the files attached to this post.
User avatar
Cherie320
 
Posts: 682
Joined: Thu Jan 03, 2013 10:44 am

Re: Really have a thing for Aluminum

Postby JoeP » Wed May 18, 2016 10:34 pm

Ahhhh... Early Chaparral.
User avatar
JoeP
 
Posts: 2994
Joined: Tue Dec 11, 2012 10:30 am
Location: Tacoma, WA

Re: Really have a thing for Aluminum

Postby Tucky » Thu May 19, 2016 8:05 am

With the number 66, that would be my guess too- remember the later one with the fans and skirts to hold it to the ground?
Jesse Deupree
F-31 SORN
Portland Maine
User avatar
Tucky
 
Posts: 1416
Joined: Sun Jan 13, 2013 4:46 pm

Re: Really have a thing for Aluminum

Postby Jamie » Thu May 19, 2016 8:14 am

Those were really cool.

This video doesn't get old for me

[youtube]http://www.youtube.com/watch?v=GiczQ9L-1hs[/youtube]
Jamie
 
Posts: 4140
Joined: Thu Feb 07, 2013 10:34 am

Re: Really have a thing for Aluminum

Postby Rob McAlpine » Thu May 19, 2016 9:33 am

The Chaparrals were built here in Midland, TX by an oil company heir who is a great engineer (Cal Tech) and a lovely guy. He still has the shop just south of town and a private track. Several of the originals are on display in a local museum.
Sometimes I sit and think. Other times I just sit.

They talk about my drinking, but never my thirst.
User avatar
Rob McAlpine
 
Posts: 2070
Joined: Fri Dec 14, 2012 11:43 am
Location: Texas, New Mexico, New England

PreviousNext

Return to Off Topic